COMO Hydraulic Oil Filtration & Recycling Systems


Hydraulic Oil Filtration & Recycling Systems

Oil Reservoir FiltrationC-165 Filter Designed for Individual Oil Reservoir Applications

Standard Features Included:
  • 1, 3 or 5 GPM Gear Pump (Fluid Flow Determined By Fluid Viscosity)
  • Inlet Wye Strainer
  • Pressure Relief Valve
  • 14 Gauge Steel Housing
  • Stainless Steel Element Lifter
  • Motor Rated On/Off Switch
  • 115 VAC 60HZ TEFC 1725 RPM Motor
  • 0-100 PSI Pressure Gauge W/Vent Valve
  • Freestanding Frame
  • Continuously Filter Fluid in Reservoir
Other Options Available:
  • Motor in any Voltage or Phase
  • Additional Pump (Centrifugal or Air Diaphragm)
  • Stainless Steel, Chrome Plated, Black Powder Coat or
     Electro-Polished Finish

 

Portable Oil Filtration SystemPortable Filtration Cart Model 120
Through multi-pass filtration, the water and/or particulate can be removed form the oil and thus extend fluid life. Oil is cleaned continuously, minimizing oil disposal costs with ultra fine filtration.

Model 120
• Cleans Oil Fast & Continuously • Ultra Fine Contamination Control to One Micron or Below • Water Removed Up to One Gallon Per Element •Moves Easily From Job to Job • Fully Automatic Operation
Features
• 3,5,8 GPM Gear Pump • Inlet Wye Strainer  • High-Low Pressure Switch • Power Indicator • Run Indicator • Flow Control • Transfer 

 

 

Portable Oil Filter CartPortable Filtration Cart Model 100

Model 120
• Cleans Oil Fast & Continuously • Ultra Fine Contamination Control to One Micron or Below  • Water Removed Up to One Gallon Per Element •Moves Easily From Job to Job  • Fully Automatic Operation
Features
• 3 or 5 GPM Gear Pump • Inlet Wye Strainer  • High-Low Pressure Switch • Power Indicator   • Run Indicator  • Flow Control • Transfer

 

 

 

Portable Oil Filter & Water RemovalModel 130 Oil Based Fluids
Oil is a mineral, it does not wear out, it just gets dirty! Reclaim your oil, save money and equipment wear with COMO Filtration Systems.

Model 130
• Cleans Oil Fast & Continuously • Ultra Fine Contamination Control to One Micron or Below • Water Removal Up to One Gallon Per Element  •Portable • Fully Automatic Operation
Features
• 5, 8, 11 GPM Pump • Inlet Wye Strainer • High-Low Pressure Switch •Power Indicator • Run Indicator • Flow Control • Transfer

 

 

Safety Valve Filter VesselSafety Valve Housing - Flow & Pressure Regulating Valve
To maintain a cleaner hydraulic system install the COMO off-line depth type low pressure filter vessel directly to a high pressure system without exceeding filter vessel pressure rating. The safety valve can be used safely with a 3,000 PSI hydraulic system (5,000 PSI model available). The safety valve is easy to install and provides excellent protection for all hydraulic applications. The valve will maintain a maximum 60 PSI in the housing with constant flow for continuous contamination control.

Safety Valve
• Meters The Flow From a High Pressure Source • Positive Control of the Pressure • Maintains a Constant Performance Over a Wide Range of Pressures • Rapid Response • Manages More Intense Hydraulic Spikes  •Dependable, Durable and Precise • Simple Installation

Available with two options:
1. The valve alone: ideal for retro-fitting existing hydraulic installations in the field. Quick and easy to install on any hydraulic system. Ideal for remote mounted installation.
2. Valve mounted to COMO Housing: ideal for new installation, valve is securely affixed to facilitate rapid installation.

Fireproof Aircraft Hydraulic Oil Recycling
Aging Phosphate Ester Oils
...
Contamination is the major cause of oil breakdown and subsequent oleo strut and, or retractable landing gear hydraulic failure. Particulate contamination and moisture provide the environment for seal and o-ring degradation leading to leaks and bleed down, or a catastrophic failure. Pump, actuator, valve seals and o-rings are vulnerable to dirt and moisture contamination that is aggravated by temperature cycling. Malfunction is not an option. COMO has standard and custom designed equipment for processing Skydrol(R) hydraulic fluid that ranges from a single filter housing to larger on site batch recycling systems. Cleaner than new oil is the goal. COMO Filtration does not remove oil additives.

Filtration for Injection Molding
Hydraulic fluid is used to transmit power, cool, seal and lubricate in the molding process. As it is used and reused it begins to absorb contaminates such as metal, sand, pipe sealant, flushing solution and even moisture. As these contaminates build up and pass through the molding process problems will start to occur. Valves will start to stick, orifices and ports will get blocked, seals will start to leak, and components will fail. All of this will result in costly downtime and productivity loss. If you are experiencing any of the following problems, you will want to consider a filtration system.
    • Sticking valves
    • Blocked orifices and ports
    • Leaking seals
    • Moisture in your hydraulic oil
    • Oxidation
    • Lower viscosity
    • Diminished additive performance
    • "New" oil contamination
    • Abrasion
    • Fatigue
    • Cavitation
Particles and moisture contamination does not mean that the hydraulic oil must be disposed of and replaced. Through multi-pass filtration, the particulate and moisture can be removed from the hydraulic oil and thus the life of the oil can be increased This can be accomplished by using a COMO portable filtration system to go from reservoir to reservoir, a stationary system to sit at each reservoir or a safety valve filter housing attached to the injection molding machine.

Hydraulic Press Oil Recycling
Contamination is a major cause of oil breakdown and hydraulic press failure. Particulate contamination and moisture provide the environment for hydraulic ream seal and o-ring degradation leading to leaks and unscheduled down time. Pump, actuator, valve seals and o-rings are vulnerable to dirt and moisture contamination that also upset a preventative maintenance effort. Malfunction is not an option.

COMO has standard and custom designed equipment for hydraulic press operations that ranges from a single filter housing to larger on site bypass recycling systems. Cleaner than new oil is the goal. COMO Filtration does not remove oil additives.

Oil Recycling Systems  |  Oil Water Separators  |  Water Recycling Systems

tools_button.jpg (6006 bytes) ... easy access to our filtration toolbox

 process | fuel & aviation | utilities | separation | air-gas | home | hvac | aftermarket
35 Years Filtration & Separation
sales@fischer-robertson.com
Fischer-Robertson, Inc.   3890 Symmes Road     Hamilton, Ohio 45014
p: 513-860-3445     f: 513-860-4744

copyright 2006